33 ls_seterror_1, 34 ls_seterror_2, 35 ls_syncmanagement – Lenze 8400 User Manual
Page 1466: 36 ls_touchprobe, 37 ls_writeparamlist, 33 ls_seterror_1 6, 34 ls_seterror_2 6, 35 ls_syncmanagement 6, 36 ls_touchprobe 6, 37 ls_writeparamlist 6
18
Function library
18.2
System blocks | LS_SetError_1
1466
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
18.2.33
LS_SetError_1
Parameterisable responses to user-defined events are tripped.
18.2.34
LS_SetError_2
Parameterisable responses to user-defined events are tripped.
18.2.35
LS_SyncManagement
Output of status information for synchronising the internal time base.
18.2.36
LS_TouchProbe
Interface for touch probe detection.
18.2.37
LS_WriteParamList
Writing to a configurable list which contains up to 32 local parameters.
For a detailed description see the main chapter "Diagnostics & error management":
For a detailed description see the main chapter "Diagnostics & error management":
For a detailed description see main chapter "Synchronisation of the internal time base of
the controller":
Internal interfaces | System block "LS_SyncManagement"
For a detailed description see the main chapter "I/O terminals":
For a detailed description see the main chapterl "