Lenze 8400 - Manual (Page 892)

16 Parameter reference
16.2 Parameter list | C00760
892
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00760
Parameter | Name:
C00760 | LA_SwitchPos: Analog connection list
Data type: UNSIGNED_16
Index: 23815
d
= 5D07
h
Connection parameters for "Switch-off positioning" application: 16-bi inputs
• Selection of the 16 bit output signals to be connected to the 16 bit input signals
• The selection list contains all 16 bit output signals which can be assigned to the 16 bit inputs displayed by the
subcodes.
Selection list
See
selection list - analog signals
Subcodes Lenze setting Info
C00760/1 0: Not connected LA_SwitchPos : wCANDriveControl
Input for control word from CAN to device control
C00760/2 0: Not connected LA_SwitchPos : wMCIDriveControl
Input for control word from communication interface to
device control
C00760/3 0: Not connected LA_SwitchPos : nVoltageAdd_a
Input for additive voltage impression
C00760/4 0: Not connected LA_SwitchPos : nBoost_a
Input for additional setpoint for motor voltage at speed
= 0
C00760/5 0: Not connected LA_SwitchPos : nPWMAngleOffset
Input for additional offset for the electrical angle of
rotation
C00760/6 0: Not connected LA_SwitchPos : nTorqueMotLim_a
Input for maximum torque in motor mode
C00760/7 0: Not connected LA_SwitchPos : nTorqueGenLim_a
Input for maximum torque in generator mode
C00760/8 0: Not connected LA_SwitchPos : nMainSetValue_a
Input for main speed setpoint
C00760/9 0: Not connected LA_SwitchPos : nAuxSetValue_a
Input for additional speed setpoint
C00760/10 0: Not connected LA_SwitchPos : nGPAnalogSwitchIn1_a
Input for analog switch - analog signal 1
C00760/11 0: Not connected LA_SwitchPos : nGPAnalogSwitchIn2_a
Input for analog switch - analog signal 2
C00760/12 0: Not connected LA_SwitchPos : nGPArithmetikIn1_a
Input for arithmetic function - analog signal 1
C00760/13 0: Not connected LA_SwitchPos : nGPArithmetikIn2_a
Input for arithmetic function - analog signal 2
C00760/14 0: Not connected LA_SwitchPos : nGPMulDivIn_a
Input for analog signal for multiplication/division
C00760/15 0: Not connected LA_SwitchPos : nGPCompareIn1_a
Input for comparison operation - analog signal 1
C00760/16 0: Not connected LA_SwitchPos : nGPCompareIn2_a
Input for comparison operation - analog signal 2
C00760/17 0: Not connected LA_SwitchPos : wSMCtrl
Interface to the optional safety system
C00760/18 0: Not connected Reserved
C00760/19 0: Not connected Reserved
C00760/20 0: Not connected Reserved
C00760/21 0: Not connected Reserved