Lenze 8400 - Manual (Page 754)

16 Parameter reference
16.2 Parameter list | C00055
754
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00055
C00056
C00057
C00058
Parameter | Name:
C00055 | Actual values
Data type: INTEGER_16
Index: 24520
d
= 5FC8
h
From version 12.00.00
Note:
When a single-track feedback has been selected for the HTL encoder ( C00115 = 1 or 3), the sign of the actual speed
value is created from the sign of the speed setpoint. In C00055/1 und C00055/2, a positive speed is always
displayed.
Display range
(min. value | unit | max. value)
-32767 rpm 32767
Subcodes Info
C00055/1 Actual value - HTL encoder FreqIn12
C00055/2 Actual value - HTL encoder FreqIn56
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1
Parameter | Name:
C00056 | Torque
Data type: INTEGER_32
Index: 24519
d
= 5FC7
h
Display of the current torque
Display range
(min. value | unit | max. value)
-65000.00 Nm 65000.00
Subcodes Info
C00056/1 Torque setpoint
• Only in case of sensorless vector control ( SLVC ) and
servo control ( SC ).
C00056/2 Actual torque value
• Estimated actual torque for all motor control modes.
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00057 | Maximum torque
Data type: UNSIGNED_32
Index: 24518
d
= 5FC6
h
Display of the maximum torque to be generated by the motor
• The maximum torque to be generated by the motor depends on various factors, e.g. on Imax in motor mode
( C00022 ) and the motor type used.
Display range (min. value | unit | max. value)
0.00 Nm 65000.00
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100
Parameter | Name:
C00058 | Output frequency
Data type: INTEGER_32
Index: 24517
d
= 5FC5
h
Display of the current output frequency
Display range
(min. value | unit | max. value)
-1300.00 Hz 1300.00
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 100