8basic drive functions (mck) – Lenze 8400 User Manual
Page 482
Advertising
8
Basic drive functions (MCK)
8.4
Basic settings
482
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Operating mode
If the limit for the following error in
is set higher than "0.0000 units" and if the current
following error exceeds this limit over the time set in
• The error response set in
will be carried out (Lenze setting: "Warning").
• The error message "
Ck05: Error, following error 1
Ck06: Error, following error 2
" will be
entered into the logbook.
• The status output bFollowErrLim1 or bFollowErrLim2 at the SB
is set to
TRUE.
Advertising