1 ls_analoginput, 2 ls_canmanagement, 3 ls_dataaccess – Lenze 8400 User Manual
Page 1431: 4 ls_devicemonitor, 5 ls_digitalinput, 6 ls_digitaloutput, Ls_analoginput 1, Ls_canmanagement 1, Ls_dataaccess 1, Ls_devicemonitor 1
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
1431
18
Function library
18.2
System blocks | LS_AnalogInput
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
18.2.1
LS_AnalogInput
Interface to the analog input terminals.
18.2.2
LS_CANManagement
Control of internal functions of the CAN driver and display of the "Operational" status as well as the
node address.
18.2.3
LS_DataAccess
Only for Lenze-internal use.
18.2.4
LS_DeviceMonitor
Motor control status signals.
18.2.5
LS_DigitalInput
Interface to the digital input terminals.
18.2.6
LS_DigitalOutput
Interface to the digital output terminals.
For a detailed description see the main chapter "I/O terminals":
Internal interfaces | System block "LS_AnalogInput"
For a detailed description see the main chapter "System bus CAN on board":
Internal interfaces | System block "LS_CANManagement"
For a detailed description see the main chapter "Motor control (MCTRL)":
Internal status signals | System block "LS_DeviceMonitor"
For a detailed description see the main chapter "I/O terminals":
Internal interfaces | System block "LS_DigitalInput"
For a detailed description see the main chapter "I/O terminals":