Lenze 8400 - Manual (Page 498)

8 Basic drive functions (MCK)
8.6 Homing
498
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Mode 12: >_Lp
Procedure:
1. Movement in positive direction with start profile data set.
2. Positive edge of the travel range limit switch sets reference.
 Positive travel range limit switch
Mode 12 > Lp Offset path Sequence profile (optional)
Start speed Profile speed
Lp Inactive Inactive Inactive Active
Ln Inactive Inactive Active Active

Note!
The load machine can also leave the travel range limit switch. There follows a return to
the home position that was set with the positive edge of the travel range limit switch.
• It is possible that, as a result, the machine will remain on an operated limit switch.
• It is therefore recommended that a home value offset be set in
C01227/1 in order to
release the operated limit switch.
1
0