Lenze 8400 - Manual (Page 107)

Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
107
4 Device control (DCTRL)
4.1 Device commands (C00002/x)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.1.8 Device search function
This function extension is available from version 06.00.00!
In some applications where controllers are installed in control cabinets or are positioned in a
spacious plant, it is often difficult to locate a device connected online for e.g. maintenance work.
There is an established online connection with the device but you do not know where the controller
is located physically.
The
C00002/27 = "1: On / start" device command serves to carry out an "optical location":
• For the time set in C00181/1 , the 7-segment display of the controller indicates "HELLO".
Afterwards, the function is turned off again automatically.
• If the device command is executed again within the set time period, the duration is extended
accordingly.
• The setting C00002/27 = "0: Off / ready" serves to abort or switch off the function.
• Adjustable time period: 0 ... 6000 s (Lenze setting: 5 s)

Tip!
The device search function can also be activated via the toolbar icon.