3commissioning – Lenze 8400 User Manual
Page 88
3
Commissioning
3.10
PC manual control
88
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
PC manual control operator dialog
On the left-hand side, the PC manual control operator dialog includes several tabs which serve to
select various control functions. On the right-hand side, setpoint and status displays are provided
for diagnostic purposes:
The execution of the various functions is described in the following chapters.
Note!
PC manual control can be exited any time by clicking the Close button.
If you exit PC manual control or change to another tab, the controller is inhibited via
device command (
), i.e. the motor becomes torqueless and is coasting unless
it already is at standstill.