1 set machine parameters, Set machine parameters, 3commissioning – Lenze 8400 User Manual
Page 69
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
69
3
Commissioning
3.8
Commissioning of the "Table positioning" technology application
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.8.4.1
Set machine parameters
1. Go to the right side of the Application parameter tab and click the Machine parameter button
to change to the Overview Machine parameter dialog level:
Note!
Setting the machine parameters is a basic prerequisite for the operating modes
"
" and "
The more precisely the machine parameters are set, the better the results of positioning!
Detailed information on the machine parameters is provided in chapter "Basic drive
functions" in subchapter "
".