2 user interface, 10 oscilloscope function – Lenze 8400 User Manual
Page 615
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
615
10
Oscilloscope function
10.2
User interface
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
10.2
User interface
The oscilloscope user interface is available in the »Engineer« from version 2.16 onwards!
How to go to the oscilloscope user interface:
1. Select the controller in the Project view.
2. Select the Oscilloscope tab from the Workspace.
The oscilloscope user interface contains the following control and function elements:
Oscilloscope toolbar
Oscillogram
Cursor function: Reading individual measured
Vertical channel settings
Selecting the variables to be recorded
Horizontal settings
Selecting the recording time/sample rate
Status bar
Input field for