Lenze 8400 - Manual (Page 299)

Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
299
5 Motor control (MCTRL)
5.15 Internal interfaces | System block "LS_MotorInterface"
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
nHlgSetValue_a
INT
Setpoint for an additional loading function of the ramp function generator
•  L_NSet_1 .nCInhVal_a
• For speed-controlled drive tasks, the current actual speed value (e.g. in case of an
active pulse inhibit, flying restart function, controller inhibit) is provided at this
output.
• Scaling: 16384 ≡ 100 % reference speed ( C00011 )
bHlgStop
BOOL
Control signal for stopping the ramp function generator ( L_NSet_1 )
TRUE Stop the ramp function generator
bBrakeChopperActive
BOOL
(from version 12.00.00)
Status signal of the internal brake chopper control
 Control of multiple internal brake choppers in the DC-bus system ( 278)
TRUE Internal brake chopper is switched-on.
Identifier
DIS code | data type
Value/meaning