Dell Emulex Family of Adapters - Manual (Page 1041)

Emulex Drivers Version 10.2 for VMware ESXi User Manual P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1041
elx_mes0125: FDISC Failed (value). Fabric out of resources
DESCRIPTION: The fabric rejected an FDISC because the switch can not support any
more virtual ports.
DATA: None
ACTION: Reconfigure the switch to support more NPIV logins. If this issue persists,
contact Emulex technical support.
elx_mes0126: FDISC failed (ulpStatus/ulpWord[4])\n
DESCRIPTION: The ELS FDISC command has failed.
DATA: None
ACTION: Check the port and switch configuration.
elx_mes0127: ELS timeout
DESCRIPTION: An ELS IOCB command was posted to a ring and did not complete
within ULP timeout seconds.
DATA: (1) elscmd, (2) remote_id, (3) ulpcommand, (4) ulpIoTag
ACTION: If the ELS command is not going through the adapter, reboot the system. If
this issue persists, report the error to Emulex technical support.
elx_mes0133: PLOGI: no memory for reg_login
DESCRIPTION: Memory allocation error.
DATA: (1) nlp_DID, (2) nlp_state, (3) nlp_flag, (4) nlp_rpi
ACTION: Memory allocation error. Check system resources. Unload unused modules.
elx_mes0134: PLOGI: cannot issue reg_login
DESCRIPTION: The ELS PLOGI mailbox command has failed.
DATA: (1) nlp_DID, (2) nlp_state, (3) nlp_flag, (4) nlp_rpi
ACTION: Check the port and switch configuration.
elx_mes0135: cannot format reg_login
DESCRIPTION: Could not allocate an RPI or DMA buffer for the mailbox command.
DATA: (1) nlp_DID, (2) nlp_state, (3) nlp_flag, (4) nlp_rpi
ACTION: None required.
elx_mes0136: PLOGI completes to N_Port <DID> completion
DESCRIPTION: A PLOGI has completed for which there is no NDLP.
DATA: (1) ulpStatus, (2) ulpWord[4]
ACTION: None required.