Dell Emulex Family of Adapters - Manual (Page 1172)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
2. Installing and Uninstalling OneCommand Manager for VMware vCenter Components
Installing OneCommand Manager for VMware vCenter
1172
Verifying the OneCommand Manager for VMware vCenter
Installation
To verify OneCommand Manager for VMware vCenter installation:
1. Log in to the vCenter Server through the VMware vSphere console.
2. Enter the IP address and credentials of the vCenter Server where OneCommand
Manager for VMware vCenter is registered. The vSphere console appears.
Figure 2-5 vSphere Console
3. In the vSphere console select Plug-ins from the menu bar and select Manage
Plug-ins. The Plug-in Manager window appears.
Figure 2-6 Plug-in Manager Window
4. In the Plug-in Manager window, check the status of OneCommand Manager for
VMware vCenter (Emulex OneCommand). If the OneCommand Manager for
VMware vCenter installation is complete, the status of OneCommand Manager for
VMware vCenter (Emulex OneCommand) is enabled by default.