Delarptableentry, Deleteisnsserver, Delroutetableentry – Dell Emulex Family of Adapters User Manual
Page 377

OneCommand Manager Command Line Interface Version 10.2 User Manual
P010067-01A Rev. A
5. CLI Client Command Descriptions
iSCSI Commands
377
DelARPTableEntry
This command removes an ARP table entry.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
DelARPTableEntry <MAC_Address> <Dest_MAC_Address> <Dest_IP_Address>
Parameters
DeleteiSNSServer
This command is used to delete an iSNS server from the current iSNS server list.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
DeleteiSNSServer <MAC_Address> <IP_Address>
Parameters
DelRouteTableEntry
This command removes a route table entry from the specified port.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
DelRouteTableEntry <MAC_Address> <Dest_IP_Address> <Subnet_Mask>
<Gateway>
MAC_Address
The MAC address of an iSCSI port.
Dest_MAC_Address
The destination MAC address to remove from the ARP table.
Dest_IP_Address
The destination IP address to remove from the ARP table.
MAC_Address
The MAC address of an iSCSI port.
IP_Address
The IPv4 or IPv6 IP address of the iSNS server.