Dell Emulex Family of Adapters - Manual (Page 946)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
946
2524: Failed to get the non-embedded SGE virtual address
The READ_FCF_RECORD mailbox command could not retrieve the SGE that was requested.
Data: None
Severity: Error
Log:
LOG_MBOX
Action: None required.
2527: Failed to allocate non-embedded SGE array.
Failed to allocate the non-embedded SGE array.
Data: None
Severity: Error
Log:
LOG_MBOX
Action: None required.
2528: Mailbox command <vpi> cannot issue
The mailbox command could not be issued because the mailbox interrupt is disabled.
Data: (1) mbxCommand (2) sli_flag (3) flag
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action: None required.
2529: Mailbox command <vpi> cannot issue
Data: (1) mbxCommand (2) sli_flag (3) flag
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action: None required.
2530: Mailbox command <vpi> cannot issue
The SLI layer in the driver is inactive.
Data: (1) mb.mbxCommand (2) sli_flag (3) flag
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action: None required.
2531: Mailbox command <cpi> cannot issue
Data: (1) mb.mbxCommand (2) sli_flag (3) flag
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action: None required.
2532: Mailbox command <vpi> (<mbxCommand>) cannot issue
The mailbox bootstrap code detected that the SLI layer is active.
Data: (1) sli4_mbox_opcode (2) sli_flag,(3) MBX_POLL
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action: None required.
2533: Mailbox command <vpi> (<mbxCommand>) cannot issue
Data: (1) sli4_mbox_opcode (2) sli_flag (3) MBX_NOWAIT
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)