Dell Emulex Family of Adapters - Manual (Page 1243)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
6. Managing Adapters and Ports
iSCSI Port
1243

Bandwidth% – The configured bandwidth value for the different Priority
Groups.
Configure DCB Dialog Box Buttons

Defaults – Click to return parameters to default DCB settings.

Configuration Rules – Click to view a window that lists the rules for configuring
priorities. You must observe these rules when configuring Priority Groups for
adapter ports.

Configuration Rules – Click to display the iSCSI Priority window that lists the
rules for configuring iSCSI priorities.
You must observe the following rules when configuring priority groups for
iSCSI adapter ports:
1. Only one priority can be configured as the iSCSI priority.
2. A maximum of two PFC priorities can be selected and one of them must
match the iSCSI priority.
Note: Not all adapters support two PFC priorities. Adapters that do not
support two PFC priorities display an error message if you try to
configure more than one PFC priority.
3. The priority group to which the iSCSI priority is assigned must contain no
other priorities.
4. The additional PFC priority must be assigned to a priority group which has
no other priorities.
5. Bandwidths of all the priority groups must add up to 100%.

OK – Click to apply and save your changes.

Cancel – Click to discard any changes you made.