Dell Emulex Family of Adapters - Manual (Page 1193)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
5. Managing Hosts
Viewing Information and Driver Parameters in a Host
1193
Figure 5-2 Host Driver Parameters Pane
Host Driver Parameters Tab Field Definitions

Installed Driver Type – The current driver installed on this host.

Driver Parameter table – A list of adapter driver parameters and their current
values.
Driver parameter specific information is displayed in this area. This includes
value, range, default, activation requirements and description.

Parameter – The name of the driver parameter.

Value – The value of the driver parameter.

Temporary – Indicates if the value can be set temporarily at port level.

Range – The range of acceptable values for the driver parameter.

Default – The default value of the parameter.

Activation Requirements – The steps required to activate the changed
value of the driver parameter.

Description – The description of the driver parameter.
Host Driver Parameter Tab Buttons

Restore – Click if you changed parameters, but did not click Apply and you
want to restore the parameters to their last saved values.

Defaults – Click to reset all parameter values to their default (factory) values.

Apply – Click to apply the global values.