Dell Emulex Family of Adapters - Manual (Page 1802)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
Appendix H. Configuring PXE Boot for NIC on Dell OCe14000-based Systems
PXE Boot Parameters Default Values
1802
Wake on LAN Enabled Enabled
Disabled
Flow Control TX & RX TX & RX
TX
RX
Disabled
PXE VLAN Disabled Enabled
Disabled
PXE VLAN ID 0 1–4094
PXE VLAN Priority 0 0–7
Virtualization Mode None NPar
SRIOV
None
NParEP Support Disabled Enabled
Disabled
Protocol NIC NIC
FCoE
iSCSI
Disabled
Min BW 25% The total bandwidth is distributed
evenly across all the enabled
partitions.
Max BW 100% From the minimum bandwidth value up
to 100% (inclusive).
Table H-1 PXE Boot Parameter Default Values (Continued)
Parameter Default Value Valid Values