Getqosinfo, Getvpd – Dell Emulex Family of Adapters User Manual
Page 402
Advertising
OneCommand Manager Command Line Interface Version 10.2 User Manual
P010067-01A Rev. A
5. CLI Client Command Descriptions
Miscellaneous Commands
402
Syntax
GetElxSecInfo
Parameters
None
GetQoSInfo
This command shows the QoS information for a specified NIC port if multichannel
support is enabled.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
GetQoSInfo <MAC_Address>
Parameters
Example
hbacmd GetQoSInfo 00-00-c9-93-20f-d6
GetVPD
This command shows the port’s VPD.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
GetVPD <WWPN|MAC>
Parameters
MAC
The MAC address of a NIC port.
WWPN
The WWPN of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.
Advertising