Dell Emulex Family of Adapters - Manual (Page 950)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
950
2558: ADD_FCF_RECORD mailbox failed with status<shdr_status> add_status
<shdr_add_status>
The ADD_FCF_RECORD mailbox command has failed.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2559: Block sgl registration required DMA size <reqlen> great than a page.
Attempting to register more SGEs with the firmware than can fit in a page.
Data: None
Severity: Warning
Log:
LOG_INIT
Action: None required.
2560: Failed to allocate mbox cmd memory\n
Failed to allocate mailbox command memory.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2561: Allocated DMA memory size (<alloclen>) is less than the requested DMA
memory size (<reqlen>)
Could not get the memory required for the number of XRIs that are attempting to be posted.
Data: None
Severity: Error
Log:
LOG_INIT
Action: None required.
2562: No room left for SCSI XRI allocation
max_xri=<sli4_hba.max_cfg_param.max_xri>, els_xri=<els_xri_cnt>n
The number of allocated XRIs has reached the max_xri value.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
2563: Failed to allocate memory for SCSI XRI management array of size
<sli4_hba.scsi_xri_max>.
Initialization could not allocate memory to hold the XRIs.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
2564: POST_SGL_BLOCK mailbox command failed status <shdr_status> add_status
<shdr_add_status> mbx status <rc>
The list of XRI SGEs failed to be registered with the firmware.
Data: None
Severity: Error
Log:
LOG_SLI
Action: None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)