Dell Emulex Family of Adapters - Manual (Page 112)

OneCommand™ Manager Application P010066-01A Rev. A
7. Managing Hosts
Searching for Hosts in the Discovery-Tree
112

Windows:
InstallationDriveLetter:\Program Files\Emulex\Util\Config\hostgroups

Linux: /usr/sbin/ocmanager/config/hostgroups

Solaris: /opt/ELXocm/config/hostgroups
The host group configuration files are completely interchangeable between different
operating systems. For example, the host group configuration files created on a Solaris
hosts can be copied directly to a Linux or Windows host, with no conversion required.
Searching for Hosts in the Discovery-Tree
The OneCommand Manager application enables you to search the discovery-tree for a
particular host by the host’s name. If the specified host name is found, the
discovery-tree scrolls up or down to bring the desired host name into view.
This capability is especially useful when you are searching for a host in large
installation with hundreds or thousands of hosts. It is also helpful in Fabric view mode,
since the ports on a specific host may be dispersed among several fabrics making the
ports on that host difficult to find in the discovery-tree.
To search for a host:
1. Do one of the following:

From the Edit menu, select Find... and enter the name of the host you are
searching for into the Find Host field.

From the toolbar, enter the name of the host you are searching for into the Find
Host field.
2. From the toolbar, click Find Host or press <Enter> on the keyboard.
The host you are searching for is highlighted in the discovery-tree.
The Find Next option on the Edit menu, or pressing F3, enables you to continue
searching for more instances of the name you specified.