Dell Emulex Family of Adapters - Manual (Page 348)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
DCB Commands
348

If channel management is disabled when this command is executed, an error
message is displayed.
Examples
4 NIC Channels
>>hbacmd CMSetLPVID 00-00-c9-12-34-56 1001 1002 1003 1004
8 Channels, Storage on 2nd channel
>hbacmd CMSetLPVID 00-00-c9-55-43-21 1001 0 1002 1003 1004 1005 1006
1007
DCB Commands
This command shows the DCB and LLDP parameters for iSCSI, FCoE, and NIC adapter
ports.
Notes

DCB commands are for DCB management of OneConnect adapters only.

These commands are not available on OCe11101-EM/EX or OCe11102-EM/EX
adapters. The following error message will be returned:
ERROR: <222>: DCB not available
GetDCBParams
This command shows the active and configured DCB and LLDP settings on a port of a
OneConnect adapter.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
GetDCBParams <WWPN|MAC>
Parameters
Example
hbacmd h=10.192.203.154 GetDCBParams 00-00-c9-93-2f-d8
WWPN
The WWPN of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.