Dell Emulex Family of Adapters - Manual (Page 1388)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1388
targetmapping
Syntax
elxvcpcmd.exe v=<vcenter server> u=<vc_username> p=<vc_pwd> <h=ESXhostIP>
targetmapping <WWPN>
Description
This command shows the targets attached to the FC and FCoE of the specified port.
Parameters
tdrtest
Note: This command supports only OneConnect OCe11102 10GBASE-T series
adapters.
Syntax
elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_password>
h=<esx_host> tdrtest <WWPN | MAC>
Description
This command runs a TDR test on a given 10GBASE-T adapter.
Parameters
umcsetlpvid
Syntax
elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_password>
h=<esx_host>umcsetLPVID <WWPN | MAC> <LPVID0> <LPVID1> [LPVIDN]
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
MAC
The MAC address of the NIC port.