Dell Emulex Family of Adapters - Manual (Page 366)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
Dump Commands
366
DeleteDumpFiles
This command deletes all diagnostic dump files for the adapter.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
DeleteDumpFiles <WWPN|MAC>
Parameters
Dump
This command creates a diagnostic dump file in the HbaCmd dump file directory.
Note: In some cases, a core dump can be performed on an inoperative OneConnect
adapter. To view inoperable adapters on the local host, use the “ListHBAs
down” command. See “ListHBAs” on page 403.
Note: For OneConnect adapters, if the “core” optional parameter is not specified, an
Enhanced FAT Dump is performed by default.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
Dump <WWPN|MAC> [core [Options]]
Parameters
WWPN
The WWPN of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.
WWPN
The WWPN of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.
core
Perform a core dump on a OneConnect adapter (local host only).
Options
For available core dump options, contact Emulex technical support.