Dell Emulex Family of Adapters - Manual (Page 1624)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
10. Configuring and Managing iSCSI Targets with the iSCSISelect Utility
Enabling DHCP Discovery Through the iSCSISelect Utility
1624
Enabling DHCP Discovery Through the iSCSISelect
Utility
If your DHCP server supports DHCP discovery and you added the root path to the
DHCP server, you can enable Discover Boot Target via DHCP using the iSCSISelect
utility. By enabling Discover IPv4 Boot Target via DHCP, you can use DHCP discovery
to provide the boot path from the DHCP server.
Note: If you leave Discover IPv4 Boot Target via DHCP disabled (default), you must
manually configure iSCSI boot.
To enable DHCP discovery through iSCSISelect:
1. After configuring the iSCSI Initiator Name, select Controller Properties from the
Controller Configuration menu and press <Enter>.
2. From the Controller Properties screen, select Discover IPv4 Boot Target via DHCP
and press <Enter>. Enable the function by selecting Enabled from the pop-up
menu and press <Enter>.
3. Select Save and press <Enter>.