Iscsi commands, Addarptableentry, Table 5-2 – Dell Emulex Family of Adapters User Manual
Page 372
OneCommand Manager Command Line Interface Version 10.2 User Manual
P010067-01A Rev. A
5. CLI Client Command Descriptions
iSCSI Commands
372
iSCSI Commands
The commands in this section support the iSCSI interface in the OCM CLI.
Note: iSCSI commands are supported only on OneConnect iSCSI ports.
Note: Only OCe14000-series adapters support IPv6 addresses.
The MAC address <MAC_Address> of the iSCSI port must be passed to each command
as the first argument.
Some commands require values to be set in a format similar to: “option_name=value”.
Type the full option name or the abbreviated option name (shown in Table 5-2, Option
Names) and enter the value. The abbreviations are not case sensitive.
AddARPTableEntry
This command adds an ARP table entry.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
AddARPTableEntry <MAC_Address> <Dest_MAC_Address> <Dest_IP_Address>
Table 5-2 Option Names
Option Name
Abbreviation
Example
Auth
au
au=1
DataDigest
dd
dd=1
DHCP
dh
dh=1
HeaderDigest
hd
hd=1
ImmediateData
id
id=1
Initiator_Alias
ia
ia=”initiator_alias”
Initiator_Name
in
in=”initiator_name”
Priority
pr
pr=1
VLAN_ENABLED
ve
ve=1
VLAN_ID
vi
vi=1