Dell Emulex Family of Adapters - Manual (Page 1506)

Boot for the Fibre Channel Protocol User Manual P010096-01A Rev. A
8. Troubleshooting
Run Adapter Diagnostic Tests
1506
2. Use the up/down arrow keys to highlight an attached block I/O device and press
<Enter>. A screen similar to Figure 8-20 is displayed.
Figure 8-20 Device Data Screen
3. To read the individual block from the media, specify the logical block address
(LBA) and press <Enter>. 256 bytes of sector data display per screen. Use the
left/right arrow keys to scroll through the data. Information similar to the
following is displayed:
Figure 8-21 LBA Data Screen
View the Results Log
The results log stores diagnostic test results, adapter diagnostics and device data. The
results log stores up to 8k of data (about 1,600 rows). Once the buffer is full, no more
data is logged.
Note: There is no reminder when the buffer is full.