Dell Emulex Family of Adapters - Manual (Page 1673)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
12. Configuring UEFI for iSCSI
Configuring the Network
1673
Configuring an IPV6 Address
To configure an IPv6 address:
1. On the Network Configuration screen (Figure 12-6), ensure the IP version is set to
IPV6 or DUAL MODE.
2. Select Configure IPV6 Address and press <Enter>. The Configure IPV6 Address
screen is displayed.
Figure 12-10 Configure IPV6 Address Screen
3. From the Configure IPV6 Address menu, you can do the following:

Enable automatic configuration of the IP address. See “Automatically Configure
an IP Address” on page 1673 for more information.

Configure the IPv6 address. See “Configuring the IPv6 Address” on page 1674
for more information.

Ping the iSCSI initiator. See “Pinging the iSCSI Initiator” on page 1674 for more
information.
Automatically Configure an IP Address
To enable automatic IP address configuration:
1. On the Configure IPV6 Address screen (Figure 12-10), select AutoConfiguration
and press <Enter>.
2. From the AutoConfiguration pop-up menu, select Enable and press <Enter>.
3. Select Save AutoConfiguration and press <Enter>.