Dell Emulex Family of Adapters - Manual (Page 1681)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
12. Configuring UEFI for iSCSI
Adding and Configuring Targets
1681
Setting a Boot Target
The discovered target must be set as a boot target to enable iSCSI boot.
To set a boot target:
1. On the iSCSI Target Configuration screen, select the target name and press <Enter>.
The Edit/Ping Target screen is displayed.
Figure 12-16 Boot Target Option on the Edit/Ping Target Screen
2. Select the Boot Target option and press <Enter>.
3. Select Primary or Secondary from the pop-up menu and press <Enter>.
4. Select Save/Login and press <Enter>.