Dell Emulex Family of Adapters - Manual (Page 907)

Emulex Drivers Version 10.2 for Linux User Manual P010081-01A Rev. A
4. Troubleshooting
Log Messages
907
0433: Wakeup on signal: rc=<rc>
A signal other than the LPFC_DATA_READY was received on the worker thread.
Data: None
Severity: Error
Log:
LOG_ELS
Action: Unload and reload the driver.
0434: PM resume failed to start worker thread: error=<error>
The driver's power management resume function could not start the worker thread.
Data: None
Severity: Error
Log:
LOG_INIT
Action: Unload and reload the driver.
0435: Adapter failed to get Option ROM version status <rc>
The driver could not read the HBA’s option ROM.
Data: None
Severity: Error
Log:
LOG_INIT
Action: Reset the HBA. Ensure the adapter’s firmware is current.
0436: Adapter failed to init, timeout, status reg <status>
The adapter failed during power-up diagnostics after it was reset.
Data: None
Severity: Error
Log:
Always
Action: This error could indicate a hardware or firmware issue. If this issue persists, report the
error to Technical Support.
0437: Adapter failed to init, chipset, status reg <status>
The adapter failed during power-up diagnostics after it was reset.
Data: None
Severity: Error
Log:
Always
Action: This error could indicate a hardware or firmware issue. If this issue persists, report the
error to Technical Support.
0438: Adapter failed to init, chipset, status reg <status>
The adapter failed during power-up diagnostics after it was reset.
Data: None
Severity: Error
Log:
Always
Action: This error could indicate a hardware or firmware issue. If this issue persists, report the
error to Technical Support.
0439: Adapter failed to init, mbxCmd <mbxCommand> READ_REV, mbxStatus
<mbxStatus>
Adapter initialization failed when issuing a READ_REV mailbox command.
Data: None
Severity: Error
Log:
Always
Action: This error could indicate a hardware or firmware issue. If this issue persists, report the
error to Technical Support.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)