Dell Emulex Family of Adapters - Manual (Page 332)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
Attributes Commands
332
Parameters
Examples
For non-VMware ESXi hosts:
hbacmd ShowLicenseAdapterID 00-12-34-56-78-9A
For VMware ESXi hosts:
hbacmd h=<IP_Address> m=cim u=root p=<password> n=<namespace>
ShowLicenseAdapterID 00-12-34-56-78-9A
Attributes Commands
HbaAttributes
This command shows a list of all adapter attributes for all ports on the adapter. The
type of information listed may vary according to the adapter model.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
HbaAttributes <WWPN>
Parameters
PortAttributes
This command shows a list of port attributes for the adapter. The type of information
listed may vary according to the adapter model and may include IPv4 and IPv6
addresses.
Note: If VEPA is supported on your adapter, the VEPA state is displayed as enabled
or disabled.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
PortAttributes <WWPN|MAC>
WWPN
The WWPN of an FCoE port.
MAC
The MAC address of a NIC or iSCSI port.
h
The IP address of the host.
WWPN
The WWPN of an FC or FCoE port.