Dell Emulex Family of Adapters - Manual (Page 397)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
LUN ExpressLane Commands
397
Notes:

For Linux and VMware operating systems, only ExpressLane-enabled LUNs are
shown by this command. LUNS without ExpressLane-enabled support are not
shown.

ExpressLane LUNs are supported on 16 GB FC ports only.
Syntax
GetExpressLaneLunList <WWPN> [vport=<vPort WWPN>] <Target WWPN>
<Option>
Parameters
Example
>hbacmd h=10.192.87.198 GetExpressLaneLunList 10:00:00:00:00:87:01:98
20:22:d4:ae:52:6e:6f:08 0
Number of LUNs: 4
FCP_LUN OS_LUN ExpressLane
------------------- ------ -------------
0000 0000 0000 0000 0 No
0001 0000 0000 0000 1 Yes
0002 0000 0000 0000 2 No
0003 0000 0000 0000 3 Yes
SetExpressLaneLunState
This command enables or disables ExpressLane on a particular LUN.
Note: ExpressLane cannot be enabled for Masked LUNs.
Supported By
Linux, VMware ESXi, and Windows
Syntax
SetExpressLaneLunState <WWPN> [vport=<vPort WWPN>] <Target WWPN> <Lun>
<State> <Option>
WWPN
The WWPN of the FC function connected to the target or physical
WWPN if virtual ports are selected.
vPort WWPN
The WWPN of an optional vPort allowing you to get the
ExpressLane LUNs of a vPort.
Target WWPN
The WWPN of the target LUNs.
Option
0=Get information from driver
1=Get information from configuration