Dell Emulex Family of Adapters - Manual (Page 1228)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
6. Managing Adapters and Ports
iSCSI Port
1228

Last Failure Type – A description of the last failure.

Last Target Failure Name – The UTF-8 string name of the target that most
recently failed a login request from this initiator.

Last Target Failure Address – The Internet Network Address of the target that
most recently failed.

Login Accept Responses – The count of Login Response PDUs received by this
initiator that were accepted.

Login Other Fail Responses – The count of Login Response PDUs received by
this initiator with any status code not counted by the other objects.

Login Redirect Responses – The count of Login Response PDUs received by the
initiator with status class of Redirection.

Login Authentication Fail Responses – The count of Login Response PDUs with
status class 0x201 Authentication Failed received by this initiator.

Login Authentication Failures – The number of times the initiator has aborted a
login because the target could not be authenticated.

Login Negotiation Failures – The number of times the initiator has aborted a
login because parameter negotiation with the target failed.

Logout Normals – The count of Logout Command PDUs generated by this
initiator with a normal reason code.

Logout Others – The count of Logout Command PDUs generated by this
initiator with any status code other than normal.

Port Row Status – This field allows entries to be dynamically added and
removed from this table via Simple Network Management Protocol (SNMP).

Portal Role – The role of a portal. A portal can operate as a target portal and/or
an initiator portal.
Viewing iSCSI Initiator Login Options
The iSCSI Initiator Login Options tab shows the set of login options used by the
initiator when logging into a target.
To view iSCSI initiator login information:
1. Select a host in the vSphere console tree-view and select the Emulex OneCommand
tab.
2. In the Emulex Device Management tree-view, select the iSCSI initiator for which
you want to view initiator login information.
3. Click the iSCSI Initiator Login Options tab.