Dell Emulex Family of Adapters - Manual (Page 1296)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
7. Updating Firmware
Performing a Batch Firmware Update in Cluster View
1296
Figure 7-4 Batch Firmware Update Jobs Window
Batch Firmware Update Jobs Window Field Definitions
Active Jobs Column Definitions

User – The user who triggered the firmware update.

Host – The IP address of the host to which the adapter/port belongs.

Adapter – The model of the adapter.

Port – The Port WWN for an FC adapter. This field is blank for a UCNA.

Start Time – The time the job is submitted.

Status Message – The status of the job.
Completed Jobs Column Definitions

User – The user who triggered the firmware update.

Host – The IP address of the host to which the adapter/port belongs.

Adapter – The model of the adapter.

Port – The port WWN for an FC adapter. This field is blank for a UCNA.

Start Time – The time the job is submitted.

End Time – The time the job is completed.

Status Message – The status of the job.
Jobs Window Buttons

Update Firmware – Click to update firmware on a different adapter in the same
cluster.

Cancel Updates – Click to cancel the jobs with “Waiting in queue to start”
status.