Configuring the host, Figure b-4, Figure b-5 – Dell Emulex Family of Adapters User Manual
Page 1727
Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual
P010097-01B Rev. A
Appendix B. Example for Installing and Configuring Linux or Citrix for PXE Boot and UEFI Boot
Linux and Citrix PXE Server Remote Installation Procedure
1727
The Network Installation and Diskless Environment window shows the IP address
of the TFTP server.
Figure B-4 Network Installation and Diskless Environment Window with IP Address
Configuring the Host
To configure the host:
1. Double-click on the IP address row in the Network Installation and Diskless
Environment window (Figure B-4). An edit dialog box is displayed.
Figure B-5 Edit Dialog Box
2. In the Hostname or IP Address/Subnet field, enter the IP address, fully qualified
hostname, or a subnet of systems that should be allowed to connect to the PXE
server for installations. In Figure B-5, the Hostname/IP Address is the IP address of
the client machine.
3. In the case of a multi-boot environment, select an operating system preference.