Dell Emulex Family of Adapters - Manual (Page 1689)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
12. Configuring UEFI for iSCSI
Adding and Configuring Targets
1689
Figure 12-25 iSNS Server Discovery via DHCP Screen
2. Select either Enable or Disable and press <Enter>.
3. Select Save Changes and press <Enter> to save the current settings.
Configuring the iSNS Server IP Address and TCP Port Number
Manually
An iSNS server can also be configured manually by entering the server IP address and
the TCP port. Only one iSNS server can be configured at present.
Note: This option is only available when the iSNS Server Discovery via DHCP option
is disabled.
To add an iSNS server manually:
1. From the iSNS Configuration screen (Figure 12-26), select iSNS Server IP and press
<Enter>.