Dell Emulex Family of Adapters User Manual
Page 897

Emulex Drivers Version 10.2 for Linux User Manual
P010081-01A Rev. A
4. Troubleshooting
Log Messages
897
0343: Ring <ringno> Cannot find buffer for an unsolicited iocb tag
<un.ulpWord[3]>
There are no more pre-allocated buffers available to handle unsolicited buffers.
Data:
None
Severity: Error
Log:
LOG_SLI
Action:
None required.
0344: Ring <ringno> Cannot find buffer for an unsolicited iocb tag
<unsli3.sli3Words[7]>
There are no more pre-allocated buffers available to handle unsolicited buffers.
Data:
None
Severity: Error
Log:
LOG_SLI
Action:
None required.
0345: Resetting board due to mailbox timeout iocb. tag 0x%x
A mailbox command failed to complete. The driver is resetting the port.
Data:
None
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action:
If the mailbox command fails again, set the lpfc_log_verbose to LOG_MBOX and retry.
0346: Ring <ring number> handler: unexpected ASYNC_STATUS evt_code <evt code>
W0 <hex w0> W1 <hex w1> W2 <hex W2> W3 <hex W3> W4 <hex W4> W5 <hex W5> W6 <hex
W6> W7 <hex W7> W8 <hex W8> W9 <hex W9> W10 <hex W10> W11<hex W11>
The HBA received an asynchronous event that was not a temperature event.
Data:
None
Severity: Error
Log:
LOG_SLI
Action:
None required.
0347: Adapter is very hot, please take corrective action
Adapter temperature is above normal range.
Data:
Temperature in Celsius
Severity: Error
Log:
LOG_TEMP verbose
Action:
Shutdown and remove the HBA. Contact Technical Support.
0348: NameServer login: node freed
The enable mode failed to free up the NameServer login.
Data:
None
Severity: Error
Log:
LOG_ELSI
Action:
None required.
0349: rc should be MBX_SUCCESS
The next mailbox command on the mailbox queue has failed.
Data:
None
Severity: Error
Log:
LOG_MBOX, LOG_SLI
Action:
None required.
Table 4-4 LPFC Error Log Messages and their Descriptions (Continued)