Dell Emulex Family of Adapters - Manual (Page 1643)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
11. Configuring UEFI for Ethernet
Starting the Emulex NIC Configuration Utility
1643
To select the NIC Mode:
1. From the Configure SRIOV screen (Figure 11-12), select the NIC Mode setting for a
particular NIC function and a pop-up menu appears.
Figure 11-13 Configure NIC Mode Pop-up Menu
2. Select NIC Only Profile or NIC-ETS Disabled and press <Enter>.
3. When you are finished, press <Esc> to return to the Controller Configuration
screen.
Saving the Current Configuration
To save the configuration changes, on the Controller Configuration screen, select Save
Current Configurations and press <Enter>.