Dell Emulex Family of Adapters - Manual (Page 1444)

Boot for the Fibre Channel Protocol User Manual P010096-01A Rev. A
6. EFIBoot
Configure EFIBoot via EFI Shell Invocation
1444
Configure EFIBoot via EFI Shell Invocation
The EFI utility has many options that can be modified to provide for different behavior.
Use the EFI utility to do the following tasks:

Enable or disable the BIOS

Configure HBA parameters

Configure boot parameters

Reset an adapter to its default values

Save and restore configurations
Note: You must issue a connect - r command in the EFI shell or reboot for any changes
to take effect.
Enable or Disable the BIOS
The BIOS must be enabled before it can be configured.
To enable the BIOS:
1. From the Main EFI – Bios Utility menu, select 1. Setup Utility and press <Enter>.
The EFI – BIOS Setup Utility menu is displayed (Figure 6-6).
Figure 6-6 EFI – BIOS Setup Utility Menu