Dell Emulex Family of Adapters User Manual
Page 344
OneCommand Manager Command Line Interface Version 10.2 User Manual
P010067-01A Rev. A
5. CLI Client Command Descriptions
Channel Management Commands
344
Configured mode: None
Available modes: vNIC1, SIMode, UFP
Multichannel Enabled - IBM UFP
>hbacmd CMGetParams 00-00-c9-12-34-56
Active Mode: UFP
Configured mode: UFP
Available modes: vNIC1, SIMode, UFP
Outer
Func# Type MAC Address VLAN Min BW Max BW
----- ----- ----------------- ----- ------ ------
0 NIC 00-00-c9-12-34-56 2 25 50
1 NIC 00-00-c9-12-34-57 3 25 50
2 NIC 00-00-c9-12-34-58 4 25 50
3 NIC 00-00-c9-12-34-59 5 25 75
Dell NPar Disabled
>hbacmd CMGetParams 00-00-c9-12-34-56
Active Mode: None
Configured mode: None
Available modes: NPAR
Dell NPar Enabled - 4 Functions/Port
Note: Even though function 1 has a minimum bandwidth of 0, some traffic flows
through.
>hbacmd CMGetParams 00-00-c9-12-34-56
Active Mode: NPAR
Configured mode: NPAR
Available modes: NPAR
Func# Type MAC Address Min BW Max BW
----- ----- ----------------- ------ ------
0 NIC 00-00-c9-12-34-56 25 50
1 NIC 00-00-c9-12-34-57 0 50
2 NIC 00-00-c9-12-34-58 25 50
3 NIC 00-00-c9-12-34-59 50 75