Dell Emulex Family of Adapters - Manual (Page 1047)

Emulex Drivers Version 10.2 for VMware ESXi User Manual P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1047
elx_mes0254: Register VPI: no memory goto mbox_err_exit
DESCRIPTION: Could not allocate memory for the REG_LOGIN mailbox command.
DATA: None
ACTION: None required.
elx_mes0255: Issue FDISC: no IOCB
DESCRIPTION: All of the pre-allocated IOCBs are in use.
DATA: None
ACTION: None required.
elx_mes0256: Issue FDISC: Cannot send IOCB
DESCRIPTION: Unable to send the fabric IOCB.
DATA: None
ACTION: Check the switch configuration.
elx_mes0257: GID_FT Query error: <ulpStatus> <fc_ns_retry>
DESCRIPTION: The GID_FT CT request for the nameserver has failed.
DATA: None
ACTION: Check the switch configuration.
elx_mes0258: Register Fabric login error: <mbxStatus>
DESCRIPTION: The REG_LOGIN for the fabric has failed.
DATA: None
ACTION: Check the port and switch configuration.
elx_mes0259: No NPIVFabric support
DESCRIPTION: The switch to which the port is connected does not support NPIV.
DATA: None
ACTION: Check the switch configuration.
elx_mes0260: Register NameServer error: <mbxStatus>
DESCRIPTION: The REG_LOGIN mailbox command has failed for the nameserver.
DATA: None
ACTION: Check the switch configuration.
elx_mes0261: Cannot Register NameServer login
DESCRIPTION: Either a memory allocation issue or an invalid parameter was sent to
the REG_LOGIN.
DATA: None