Dell Emulex Family of Adapters - Manual (Page 1099)

Emulex Drivers Version 10.2 for VMware ESXi User Manual P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1099
elx_mes1950: ENOMEM IOCB resource not available
DESCRIPTION: Driver could not allocate IOCBs needed to post loopback receive
buffers.
DATA: (1) (2) (3)
ACTION: Software driver error. If this issue persists, report these errors to Emulex
technical support.
elx_mes1951: ENOMEM MBUF resource not available
DESCRIPTION: Driver failed to get memory buffer needed for loopback test.
DATA: None
ACTION: Software driver error. If this issue persists, report these errors to Emulex
technical support.
elx_mes1952: ENOMEM DMA resource not available
DESCRIPTION: Driver failed to get DMA buffers needed for loopback test
DATA: (1) (2) (3)
ACTION: Software driver error. If this issue persists, report these errors to Emulex
technical support.
elx_mes1957: EPERM Illegal BDE count [<value>]
DESCRIPTION: Driver received too many receive buffers for loopback operation.
DATA: (1) receive buffer count
ACTION: Software driver error. If this issue persists, report these errors to Emulex
technical support.
elx_mes2000: Failed to allocate mbox for READ_FCF cmd
DESCRIPTION: Failed to allocate mailbox for READ_FCF command.
DATA: None
ACTION: None required.
elx_mes2001: Unable to allocate memory for issuing SLI_CONFIG_SPECIAL
mailbox command
DESCRIPTION: Unable to allocate memory for issuing the SLI_CONFIG_SPECIAL
mailbox command.
DATA: None
ACTION: None required.
elx_mes2002: Error Could not grow rpi count
DESCRIPTION: An error occurred because the RPI count could not be increased.
DATA: None