Dell Emulex Family of Adapters - Manual (Page 1128)

Emulex Drivers Version 10.2 for VMware ESXi User Manual P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1128
ACTION: Contact Emulex technical support.
elx_mes3153: Fail to perform the requested access: <value>
DESCRIPTION: Driver failed to execute the requested management action.
DATA: Register action.
ACTION: Contact Emulex technical support.
elx_mes3154: BLS ABORT RSP failed, data <value/value>
DESCRIPTION: Driver issued BLS ABORT Response failed to complete.
DATA: I/O status and I/O reason
ACTION: Contact Emulex technical support.
elx_mes3161: Failure to post els sgl to port.
DESCRIPTION: Driver failed to port scatter gather list to the adapter.
DATA: None
ACTION: Contact Emulex technical support.
elx_mes3172: SCSI layer issued Host Reset Data: <value>
DESCRIPTION: SCSI layer issued a host reset request to the driver.
DATA: Reset result
ACTION: Contact Emulex technical support.
elx_mes3175: Failed to enable interrupt
DESCRIPTION: The driver failed to get interrupts re-enabled after an adapter reset.
DATA: None
ACTION: Contact Emulex technical support.
elx_mes3176: Misconfigured Physical Port - Port Name <value>
DESCRIPTION: The driver has detected an unknown firmware name.
DATA: Detected firmware name
ACTION: Contact Emulex technical support.
elx_mes3177: Nport <value>, DID <value> in wrong state for discovery to
start. Failing request Data <value>
DESCRIPTION: The driver is trying to restart SAN discovery and detected an NPort is
in the wrong initial state.
DATA: NPort ID, FCID, NPort state
ACTION: Reset link. If this fails, contact Emulex technical support.