Scan for fibre devices, Scan for fibre devices 5, Figure 7-4 – Dell Emulex Family of Adapters User Manual
Page 1475
Advertising
Boot for the Fibre Channel Protocol User Manual
P010096-01A Rev. A
7. Configure EFIBoot via UEFI HII (Human Interface Infrastructure) in a UEFI 2.1 System
Scan for Fibre Devices
1475
3. Make your selection and press <Enter>. The utility displays the new boot from
SAN setting.
Figure 7-4 New Boot From SAN Setting
Scan for Fibre Devices
To scan for fibre devices:
1. From the Adapter Selection screen, select the adapter that you want to scan for
Fibre devices and press <Enter>.
2. From the Main menu, select Scan for Fibre Devices and press <Enter>. A list of the
discovered targets is displayed. This is only a list of discovered target devices to
Advertising