Multichannel ufp configuration, Figure 6-64, Figure 6-65 – Dell Emulex Family of Adapters User Manual
Page 1282
OneCommand Manager for VMware vCenter Version 10.2 User Manual
P010089-01A Rev. A
6. Managing Adapters and Ports
OCe14100–Series Adapters
1282
Figure 6-64 MultiChannel SIMode View
Other than the names, SIMode and UMC configuration is exactly the same. See “UMC
Configuration View” on page 135.
Multichannel UFP Configuration
When UFP is selected, the Adapter Configuration tab looks like the following:
Figure 6-65 MultiChannel UFP View (concurrent mode storage)
The Channel Configuration table shows the channel properties for multichannel UFP.
There are drop-downs for each port's channels second and third channels.
Multichannel UFP channel protocol assignments are subject to the following rules:
The first channel can only be assigned NIC protocols. The first channel cannot
be assigned None.