Dell Emulex Family of Adapters - Manual (Page 508)

Offline and Online Adapter Management Utilities Version 10.2 User Manual P010071-01A Rev. A
4. Offline Adapter Management Utility Command Line Interface
Using Script Files
508
Script File Commands
The following is a sample script file. Each command follows the syntax covered above.
The comment lines begin with a semicolon (;):
version
screendisplay o=0
;download a=lpe11000 i=c:\temp\zd272a2.all
;reset n=1 s=0
;reset n=2 s=0
reset n=all s=0
listboot n=1
enableboot n=1 i=2
; pciloopback n=1 r=10 o=1
; pciloopback n=2 r=10 o=2
; pciloopback n=all r=50 o=3
intloopback n=1 r=10 o=1
intloopback n=2 r=10 o=1
extloopback n=1 r=40 o=3
extloopback n=2 r=40 o=3
;repeat r=10
Repeating a Series of Commands (repeat)
Enter this command at the end of a script file to repeat a series of commands from the
beginning of the script file a specific number of times.
Note: To interrupt and stop the repeat command, press <S> on the keyboard.
To repeat the series of commands in the script file, add the following as the last line of
the file:
repeat r=<repeat count>
The following example repeats the series of commands in the script file 10 times.
repeat r=10
Enabling or Disabling Test Messages on the Screen
(screendisplay)
This command enables or disables test message display on the screen.

o=0 – Prevents messages from appearing

o=1 – Enables messages
Note: This command is supported only in script files.
To enable or disable test message displays, add the following line to the script:
screendisplay o=<display option>