Dell Emulex Family of Adapters - Manual (Page 1761)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
Appendix E. Loading and Unloading UEFIBoot from the UEFI Shell
Loading UEFIBoot from the UEFI Shell
1761
Appendix E. Loading and Unloading UEFIBoot
from the UEFI Shell
Loading UEFIBoot from the UEFI Shell
The UEFI boot code is distributed with the firmware in a .UFI file. This file may be
downloaded to a NIC, iSCSI, or FCoE adapter through the HII interface in the NIC
UEFI code.
Unloading UEFIBoot from the UEFI Shell
To unload UEFIBoot:
1. View Emulex driver handle information by typing “
drivers
” and pressing
<Enter> at the shell prompt. A list of drivers is displayed.
Figure E-1 Driver Listing
2. Write down the Emulex NIC, FCoE or iSCSI driver handles. For the above case, the
Emulex NIC driver handle is 122 and the Emulex iSCSI driver handle is 126.
3. To unload the Emulex NIC driver in the previous example, type “
unload 122
” and
press <Enter>.
4. To unload the Emulex iSCSI driver in the previous example, type “
unload 126
”
and press <Enter>.