Dell npar enabled, Figure 6-69, Figure 6-70 – Dell Emulex Family of Adapters User Manual
Page 1286
Advertising
OneCommand Manager for VMware vCenter Version 10.2 User Manual
P010089-01A Rev. A
6. Managing Adapters and Ports
OCe14100–Series Adapters
1286
NParEP Mode Enabled
Figure 6-69 Dell Four Port NPar Configuration, NParEP Mode Enabled
If the NParEP Mode check box is selected (enabled), up to four partitions per port can
be configured. FCoE or iSCSI can be configured on the second through fourth
partitions, but only one FCoE and one iSCSI can be configured. None cannot be
configured on the first partition.
Dell NPar Enabled
When NPar is enabled, the Adapter Configuration tab looks like the following:
Figure 6-70
Adapter Configuration Tab with NPar Enabled
Advertising