Dell Emulex Family of Adapters - Manual (Page 62)

OneCommand™ Manager Application P010066-01A Rev. A
2. Installing and Uninstalling OneCommand Manager Application Components
Installing the OneCommand Manager Application
62
2. Installing and Uninstalling OneCommand
Manager Application Components
Installing the OneCommand Manager Application
Note: If the OneCommand Vision application was previously installed on the system,
you will be prompted to remove it before installing the OneCommand Manager
application.
In Windows
There are two ways to install the OneCommand Manager application in Windows:

Attended installation using the GUI.

Unattended installation using the command line.
Attended Installation in Windows
To install the OneCommand Manager application in Windows:
1. From the Emulex website, download the x64 or x86 OneCommand Manager
Enterprise Kit installation file.
2. Navigate to the directory to which you downloaded the file.
3. Double-click the elxocm<version>.exe. The Emulex OCManager Enterprise
window appears. Click Next. The Installation Options window appears.
4. Check the components that you want to install and click Install. The Management
Mode dialog box appears.
Figure 2-1 Management Mode Dialog Box
5. The Management Mode dialog box enables you to select Secure Management to
assign the desired user privileges, or you can choose one of the other management