Dell Emulex Family of Adapters - Manual (Page 1699)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
13. Configuring UEFI for FCoE
Adding Boot Devices
1699
2. From the Emulex Adapter Configuration Main Menu (Figure 13-3), select Add Boot
Device and press <Enter>. Discovered targets are displayed.
Figure 13-6 SAN Discovery Targets List
3. Select a target and press <Enter>.
4. Select a LUN from the list and press <Enter>. The target list is displayed.
Figure 13-7 LUN Listing